The new Benz DIN Abrader accurately and consistently measures the abrasion resistance of cured rubber compounds, enabling quality control engineers, purchasing agents and researchers to compare and verify the durability of rubber compounds.

The Benz DIN Abrader offers companies verification of materials abrasion durability, which is crucial for insuring quality, comparing suppliers and verifying claims.

The Benz DIN Abrader removes rubber from a 16 mm (5/8") diameter sample. It allows the abrasion of compounds up to 40 m (36.6 yds.) long, using pretreated sandpaper in an unusual method that prevents the paper from becoming clogged with rubber residue.

The amount of pressure applied to the compound can be adjusted in 5 Newton increments, up to 20 Newtons, showing the effect on the compound of different abrasion pressures.

A sample of compound can also be rotated as it moves across the Benz DIN Abrader drum, showing the effects of multidirectional abrasion. Manufacturers of products like tires, hose or gaskets, for example, can get a true reading of his compound when actually put to use.

The Benz DIN Abrader itself measures only 76 cm long by 38 cm deep and 38 cm high (30" x 15" x 15") and is constructed in anodized aluminum and stainless steel with a plexiglass cover, allowing its operation to be visible.

At the end of a testing cycle, which can be less than 40 m, The Benz DIN Abrader can auto-stop. Operation is simple and quick.
Unit of Measure

Specifications

Abrasion of Compounds

N/A Up to 40 m36.6 yd

Drum Speed

N/A 45 rpm

Drum Speed Tolerance

N/A ±5

Downward Force of Mass

N/A 5 to 20 N

Voltage

N/A 120 V

Frequency

N/A 60 Hz

Phase

N/A 1

Current

N/A 5 A

Height

N/A 15 in38 mm

Width

N/A 30 in76 mm

Depth

N/A 15 in38 mm

Weight

N/A 55 lb25 kg