The Benz NBS Abrader meets and exceeds specifications, described in ASTM D-1630, for abrasion resistance of vulcanized rubber or other compounds. This abrasion machine consists of a 6" diameter drum; three arms, pivoted at one end, with a mass suspended from the other end; three dial thickness gauges with 0.001" graduation; an internal blower and vacuum; a digital cycle counter; and a controlled abrasive (40 grit, No. 1-1/2 garnet paper; 6" in width)
  • clean, uncontaminated specimens - internal blower and vacuum
  • precise cycle measurement - digital display counter
  • simple to use - ready-to-test within minutes
  • increase test volume - three samples tested at once
Benz services and calibrates every instrument we sell, as well as most major manufacturers' models.
Unit of Measure

Specifications

Drum Diameter

N/A 6 in

Drum Speed

N/A 45 rpm

Drum Speed Tolerance

N/A ±5

Downward Force of Mass

N/A 22 N5 lbf

Required Air Pressure 3 cfm

N/A 100 psi

Voltage

N/A 120 V

Frequency

N/A 60 Hz

Phase

N/A 1

Current

N/A 4 A

Height

N/A 13 in330 mm

Width

N/A 16 in406 mm

Depth

N/A 12 in304 mm

Weight

N/A 55 lb25 kg